(PDF) Victaulic® FireLock NXT™ Dry Valve Series 768Nstatic.victaulic

Victaulic Nxt Dry Valve. Valve Solutions Pressure Relief Valve Alternative Victaulic 104c/02 2809 1725 NOTE • CCC approval for DN80, DN100, DN150, DN200 Slow-Fill Ball Valve of the Victaulic AMTA (if applicable) Open Fast-Fill Ball Valve of the Victaulic AMTA (if applicable) Closed: NOTE: The minimum air pressure for a Series 768N FireLock NXT Dry Valve installed with or without a Series 746-LPA Dry Accelerator shall be 13 psi/90 kPa/0.9 Bar

104c/02 2809 1725 NOTE • CCC approval for DN80, DN100, DN150, DN200 FireLock NXT™ Series 764 Alternate Wet/Dry Valve Submittal - Discontinued Product Support 30.83 Download

Victaulic Series 769N FireLock NXT™ Deluge Valve Animation YouTube

INSTALLATION, MAINTENANCE, AND TESTING MANUAL FireLock NXT™ Dry Valve SERIES 768 INTRODUCTION The following instructions are a guide for proper installation of Victaulic Series 768 FireLock NXT Dry Valves • Fire-Pac Series 745 (refer to Victaulic submittal 30.23) Pipe Preparation: • Victaulic Original Groove System Application/Media: • For use on fire protection systems only 2.0 CERTIFICATION/LISTINGS EN 12259-3: 2000 Cert/LPCB ref FireLock NXT™ Series 768N Dry System Check Valve

Victaulic Series 769N FireLock NXT™ Deluge Valve Animation YouTube. Accessories and equipment that are not approved for use with this dry valve may cause improper system. The dry valve operation is housed in a heated location and uses pressurized air or nitrogen to fill the pipes.

Preaction Valves for Fire Protection Victaulic. FireLock NXT™ Series 768N Dry System Check Valve The maximum air pressure shall be 20 psi/138 kPa/1.4.