Cache Module Status Degraded. System and method for cache management using a cache status table But found on iLO logs that the smart array module was Failed (Status message: Smart array P420 in slot 3 cache status problem detected) Ensure that the power cable between the FBWC module and the PCI Riser is present and connected properly.
【记一次HP DL580 Gen9 显示“cache moudle status failed”报错处理过程】_cache module from blog.csdn.net
The cache is DRAM, thus it's a lot faster than typical disk drives, and this speeds up e.g to obtain the cache module board's current memory data width and
【记一次HP DL580 Gen9 显示“cache moudle status failed”报错处理过程】_cache module
"Storage Degraded" "Cache Module Status Failed" We already bought a complete new "HP Smart Array P440/4GB 12Gbps SAS Controller 749797-001 726815-002" and cache cable "Storage Degraded" "Cache Module Status Failed" We already bought a complete new "HP Smart Array P440/4GB 12Gbps SAS Controller 749797-001 726815-002" and cache cable to obtain the cache module board's current memory data width and
DL360e Gen8 HP motherboard replacement, cache module installation G8. Caching operations such as Expansion, Extension, and Migration are temporarily suspended until the batteries/capacitors are fully charged View the cache memory fields Data Width and Transfer Rate
DL388 Gen9 有Cache Module Status的告警 知了社区. In the ILO, I'm seeing: "Storage Degraded" "Cache Module Status Failed" Despite purchasing a new "HP Smart Array P440/4GB 12Gbps SAS Controller 749797-001 726815-002 and a new cache cable, the issue persists. Upon further examination the iLO and array reported that the "Cache Module Status" (on a Model HP Smart Array P420i Controller) has failed and that it is "disabled because a capacitor has failed to charge to an acceptable level" Please see screenshots from iLO and.